Table of Contents
Advertisement
4.
Pull the drive away from the socket to remove it (2).
To install a solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-5
Memory module descriptions and part numbers
Description
32 GB
32 GB (People's Republic of China (PRC))
16 GB
16 GB (PRC)
8 GB
8 GB (PRC)
Before removing the memory, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
If you are replacing a memory module, remove the existing memory module:
1.
Lift the tape (1) that secures the memory cover to the heat sink.
2.
Lift the tape (2) that secures the memory cover to the SSD cover.
3.
Use a tab (3) to lift the memory cover off the system board. The cover is held in place by clips.
Preparation for disassembly on page
Bottom cover on page
37).
Spare part number
N50075-001
N77400-001
N38627-001
N77399-001
N37792-001
N77398-001
Battery on page
48).
Memory modules
37).
43
Advertisement
Table of Contents
