Table of Contents
Advertisement
3.
Remove the card reader board (3).
To install the smart card reader, reverse this procedure.
Audio jack
To remove the audio jack, use this procedure and illustration.
Table 6-7
Audio jack description and part number
Description
Audio jack (included in the Cable Kit)
Before removing the audio jack, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the audio jack:
1.
Disconnect the audio jack cable from the USB board ZIF connector (1).
2.
Remove the Phillips 2.0 × 4.0 screw (2) that secures the audio jack to the computer.
54
Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
37).
Spare part number
N09040-001
Battery on page
48).
37).
Advertisement
Table of Contents
