^ Push the ice cube drawer in as far as
it will go within the next 60 seconds.
You will hear the ice cube tray rotating.
^ Wait until the ice cube tray has
completed this rotation before
continuing.
Then clean the ice cube tray while still
in the appliance:
^ Remove the ice cube drawer. Clean
the drawer.
^ Clean the ice cube tray b in the ice
cube maker.
After cleaning:
^ Press the On/Off button on the ice
cube maker.
^ Push the ice cube drawer back in
completely.
You will hear the ice cube tray rotating
into its starting position.
The ice cube maker will begin to
produce ice cubes again after a
maximum of 6 hours.
Discard the ice cubes from the first
three ice cube making processes.
They are not suitable for
consumption due to washing-up
liquid being used during cleaning.
Cleaning and care
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
Door seals
Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
After cleaning
^ Replace all shelves and accessories
in the refrigerator section.
^ Reconnect the appliance to the
electricity supply and switch it on.
^ Switch on the SuperFreeze function
so that the freezer can cool down
quickly. The indicator light will come
on.
^ Once the freezer has reached the
required temperature, place the food
back in the freezer baskets and put
them back in the freezer.
^ Switch off SuperFreeze by touching
the SuperFreeze sensor when the
temperature in the freezer is a
constant -18 °C or colder.
The indicator light will go out.
39