hit counter code

Setting The Temperature; Adjusting The Temperature In The Dry Compartment Of The Masterfresh Zone; Temperature Range - Miele K 2601 Vi Operating And Installation Instructions

Table of Contents

Advertisement

Setting the temperature

 Touch the  sensor for setting the
temperature.
The previously set temperature will
appear.
 Use the  and  sensors to set the
temperature. Keeping your finger on
the sensor changes the temperature
continuously.
 Confirm the temperature setting
with OK or wait approx. 8 seconds
after the last touch of a sensor. The
temperature will then be adopted
automatically.
Useful tip: The newly set temperature
can also be confirmed and adopted by
closing the appliance door.
The temperature display always shows
the required temperature.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature. It
will take this long for the required
temperature to be reached.
 If, after this time, the temperature is
still too high or too low, adjust it
again.
The correct temperature
Adjusting the temperature in the dry
compartment of the MasterFresh
zone
The temperature in the dry
compartment of the MasterFresh zone
is maintained at approx. 0 °C.
However, if you would like it to be
warmer or colder, you can adjust the
temperature slightly (see "Selecting
further settings – Adjusting the
temperature in the MasterFresh zone
(dry compartment) ").
Useful tip: You can select a lower
setting, for example for storing
particularly delicate fish. A slightly
higher temperature is preferable for
example for storing ready-to-eat food.

Temperature range

The temperature in the refrigerator
section can be set from 2 °C to 8 °C.
The temperature in the dry
compartment of the MasterFresh zone
can be set from approx. -1 °C to 3 °C.
79

Advertisement

Table of Contents
loading

Table of Contents