Cleaning The Door Seal; Cleaning The Ventilation Gaps; Replacing The Active Airclean Filters - Miele K 2601 Vi Operating And Installation Instructions
Hide thumbs
Also See for K 2601 Vi:
- Operating and installation instructions (116 pages) ,
- Manual (34 pages) ,
- Operating and installation instructions (108 pages)
Table of Contents
Advertisement
Cleaning and care
Cleaning the door seal
Risk of damage due to incorrect
cleaning.
If you treat the door seals with oils or
grease, they can become porous.
Do not use any oils or grease on the
door seals.
The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example). A build-up of
dust will increase the energy
consumption of the appliance.
94
Replacing the Active AirClean
filters
The Active AirClean filters in the
refrigerator section need to be replaced
approx. every 6 months.
Change Active AirClean filter
the display.
Confirm the message with OK.
To remove the holder for the Active
AirClean filters, press against the
retainers on both sides of the holder
from the rear and pull the holder
downwards diagonally from the
frame.
Remove the used Active AirClean
filters and place the new Active
AirClean filters with the surrounding
edge pointing downwards in the
holder.
To replace the holder, press against
the retainers on both sides of the
holder from the rear and clamp it into
the gap on the frame from below.
appears in
Advertisement
Table of Contents
