Miele K 2601 Vi Operating And Installation Instructions page 99
Hide thumbs
Also See for K 2601 Vi:
- Operating and installation instructions (116 pages) ,
- Manual (34 pages) ,
- Operating and installation instructions (108 pages)
Table of Contents
Advertisement
Messages in the display
Message
The alarm sounds and
the message
Close the
door
appears in the
display.
The temperature display
is dark and the
symbol lights up in
the display.
F Please call Miele Service
appears in the display
and an alarm sounds.
The symbol lights up
in the display. The
refrigeration appliance
does not get cold, but
the appliance controls
are working.
Possible cause and remedy
The appliance door is open.
Close the appliance door.
If you want to switch the alarm off early, touch the
OK sensor in the display.
The alarm will stop.
is switched on. The interior lighting is
Sabbath mode
switched off and the refrigeration appliance is
cooling.
You can switch off Sabbath mode at any time (see
"Selecting further settings - Switching
on and off").
mode
There is a fault.
Make a note of the fault message if necessary.
Call Miele.
To turn the alarm off, touch the symbol.
The error message will not disappear from the
display until the error has been rectified.
The voltage level is too high or too low.
Observe the connection data in "Installation -
Electrical connection".
Contact customer service if necessary.
To turn the alarm off, touch the symbol.
The error message will not disappear from the
display until the error has been rectified.
is switched on. Demo mode allows the
Demo mode
appliance to be presented in a showroom without the
cooling system being switched on. Do not activate
this setting for domestic use.
Switch off Demo mode (see "Selecting further
settings - Switching off
Problem solving guide
").
Demo mode
Sabbath
99
Advertisement
Table of Contents
