Miele CM 6160 Operating Instructions Manual page 24
Hide thumbs
Also See for CM 6160:
- Operating instructions manual (92 pages) ,
- Instruction manual (92 pages) ,
- Operating instructions manual (92 pages)
Advertisement
Commissioning
Before using for the first time
Remove any notices from the
machine.
Remove the protective foil from the
drip tray cover and place the drip tray
cover into the lower panel.
Place the coffee machine on a flat
surface that is not sensitive to water
(see "Installation").
Clean the appliance before filling it
with water and coffee beans. Refer to
the relevant instructions in "Cleaning
and care"; for example, clean the
bean container with a soft, dry cloth.
Clean the water container, the bean
container and the central spout.
Remove the water container and fill it
with fresh, cold tap water. Only fill the
water container up to the "max."
marker and then refit it in the
machine.
Take the lid off the bean container, fill
it with roasted coffee beans and
replace the lid.
Insert the plug of the coffee machine
into the socket.
24
Switching on for the first time
and commissioning
Touch the On/Off button if nothing
is visible on the display.
Selecting the display language
Select the desired display language.
You might also be asked for your
location.
Setting up the network (Miele@home)
You can connect your coffee machine to
your home WiFi network.
The following appears in the display
during commissioning:
"Miele@home"
Tip: You can also choose to set up
Miele@home for your coffee machine at
a later point. In this case, select
Make sure that your WiFi network
signal is sufficiently strong in the
coffee machine's installation site.
Touch
Continue
Select the connection method you
wish to use.
Follow the instructions provided in
the coffee machine display and in the
Miele app.
Connection successfully established.
appear in the display.
Touch OK to proceed with
commissioning.
Setting the water hardness level
Contact your local water supplier to
find out your local water hardness
range if necessary.
More information can be found under
"Settings – Water hardness".
Set up
Skip
.
.
will
Advertisement
