Miele CM 6160 Operating Instructions Manual page 74

Hide thumbs Also See for CM 6160:

Troubleshooting

Problem

The milk sputters when

it is dispensed. Hissing

noises can be heard

when milk is being

heated up or frothed.

Although the milk should

be frothed, only hot milk

comes out of the central

spout.

Cause and remedy

The milk pipework was not correctly fitted.

 Pay attention to the seam on the double hose when

you connect the milk pipework into the central

spout.

 If you have disconnected the milk pipework from the

rinse valve: the double hose has different diameters.

Make sure all parts are assembled correctly.

The milk temperature is too high. Good milk froth can

only be achieved with cold milk (below 10 °C).

 Check the temperature of the milk.

The central spout is not fitted correctly and is taking in

air. Or the spouts are blocked.

 Check whether the central spout has been

assembled correctly. Make sure that all parts are

tightly connected to one another.

 Clean the central spout. Knead the spouts under

running water to loosen any soiling.

The milk pipework, connecting pieces, the stainless

steel tube of the milk flask or the milk siphon are

blocked.

 Clean all parts carefully with the cleaning brush.

The steam jet on the central spout has a blockage.

 Clean the steam jet with the cleaning brush (see

illustration).

Cm 6360 Cm 6560