Miele CM 6160 Operating Instructions Manual page 69
Hide thumbs
Also See for CM 6160:
- Operating instructions manual (92 pages) ,
- Instruction manual (92 pages) ,
- Operating instructions manual (92 pages)
Advertisement
Problem
Fill and replace the water
appears in the
container
display even though the
water container is full
and in the machine.
Fill and replace the water
appears after
container
switching on even
though the container is
filled and fitted in the
machine. The appliance
does not rinse.
After switching on the
machine, the message
Empty the drip tray and the
appears
waste container
even though they are
both empty.
Cause and remedy
The water container is not in the correct position.
Remove the water container and push it back in
again.
Remove and clean the water container filter (see
"Cleaning and care – Cleaning the water container
filter").
The water container was not correctly filled and
refitted for descaling.
Fill the water container to the descaling symbol
and restart the descaling programme.
The coffee machine needs descaling.
Switch the coffee machine off with the On/
Off button . Wait approx. 1 hour.
Switch the appliance back on again. As soon as
appears, touch the sensor control and
Heating-up
then select
Descale the appliance
Descale the coffee machine.
This is not a fault.
When the drip tray and waste container are emptied,
the internal counter is not reset after the coffee
machine has been switched off.
the waste container
the drip tray and the waste container are not filled to
the maximum.
Troubleshooting
.
Empty the drip tray and
appears in the display even though
69
Advertisement
