Miele CM 6160 Operating Instructions Manual page 50
Hide thumbs
Also See for CM 6160:
- Operating instructions manual (92 pages) ,
- Instruction manual (92 pages) ,
- Operating instructions manual (92 pages)
Advertisement
Cleaning and care
Unsuitable cleaning agents
Contact with unsuitable cleaning
agents can alter or discolour the
external surfaces. All surfaces are
susceptible to scratching.
Remove all cleaning agent residues
immediately. To protect the machine
and surrounding surfaces from
damage, make sure you remove any
spillages or splashes of descaler
immediately.
To avoid damaging the surfaces, do not
use:
- Cleaning agents containing soda,
ammonia, acids or chlorides
- Solvent-based cleaning agents
- Cleaning agents containing descaling
agents (unsuitable for cleaning the
casing)
- Stainless steel cleaners
- Dishwasher cleaning agents
(unsuitable for cleaning the casing)
- Glass cleaning agents
- Cleaning agents for ceramic glass
hobs
- Oven cleaner
- Abrasive cleaning agents, e.g. powder
cleaners and cream cleaners
- Hard, abrasive sponges, e.g. pot
scourers, brushes or sponges which
have been previously used with
abrasive cleaning agents
- Eraser stain remover blocks
- Sharp metal scrapers
- Steel wool or stainless steel wire
scourers
50
Cleaning the drip tray and
waste container
Clean the drip tray and waste
container every day to avoid
unpleasant smells and mould.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the coffee
machine display when the drip tray and/
or the waste container is full and needs
to be emptied. Empty the drip tray and
the waste container.
Risk of burns!
If the rinsing process has just
finished, wait a while before
removing the drip tray from the
coffee machine. The water used for
rinsing will continue to run out of the
coffee spouts for a while.
Remove the drip tray and the waste
container while the coffee machine is
switched on. Otherwise the message
Empty and refit the drip tray and the waste
will appear in the display even
container
though the drip tray and/or the waste
container are not filled to the
maximum level.
Push the central spout up as far as it
will go.
Advertisement
