Miele CM 6160 Operating Instructions Manual page 44
Hide thumbs
Also See for CM 6160:
- Operating instructions manual (92 pages) ,
- Instruction manual (92 pages) ,
- Operating instructions manual (92 pages)
Advertisement
Adjusting settings
Altitude
If the coffee machine is installed at high
altitudes, the lower air pressure will
cause the water to boil at a
correspondingly lower temperature. You
can set the local altitude to ensure the
ideal drink preparation temperatures.
Performance mode
You can select the appropriate
performance mode for how you use
your machine.
Eco mode
default.
Eco mode
Eco mode is an energy-saving mode.
The system does not heat up until
someone starts making a drink.
Barista mode
This performance mode has been
optimised for unadulterated coffee
enjoyment. Users can enjoy coffee-
based drinks without any delay as the
coffee machine remains heated to the
brewing temperature. This mode
consumes more energy than Eco mode.
Latte mode
This performance mode has been
optimised for preparing milk. Milk-based
drinks can be prepared within a much
shorter space of time. This mode
consumes more energy than Eco mode
and Barista mode.
Party mode
This Performance mode has been
configured for the occasional intensive
use of the coffee machine, e.g. for family
get-togethers.
44
is set by
Clean the coffee machine thoroughly
after intensive use, particularly the
milk pipework. It may be necessary
to descale the coffee machine and
degrease the brew unit.
Please note the following information
about Party mode:
- Cleaning status messages or cleaning
prompts are suppressed and delayed
until the machine is next switched on.
- The timer
Switch off after
deactivated. The coffee machine
switches off 6 hours after the last
sensor was pressed.
- The cup light remains permanently
switched on at the maximum
brightness level for as long as the
coffee machine stays switched on.
Water hardness
Programme the coffee machine to the
water hardness level of your area so that
it functions correctly and does not get
damaged.
Contact your local water supplier to find
out your local water hardness range if
necessary.
If you are using bottled drinking water,
e.g. mineral water, select settings
according to the calcium content. The
calcium content is specified on the label
of the bottle in mg/l Ca
2+
(mg Ca
/l).
Do not use carbonated water.
The hardness level is set to 21 °dH by
default.
is
2+
or ppm
Advertisement
