Miele CM 6160 Operating Instructions Manual page 70
Hide thumbs
Also See for CM 6160:
- Operating instructions manual (92 pages) ,
- Instruction manual (92 pages) ,
- Operating instructions manual (92 pages)
Advertisement
Troubleshooting
Problem
Neither milk nor milk
froth comes out of the
central spout.
Empty the drip tray and the
appears in
waste container
the display, even though
the drip tray has been
emptied.
Insert the drip tray and the
appears in
waste container
the display even though
both are fitted.
70
Cause and remedy
The milk pipework was connected incorrectly to the
central spout.
The seam on the milk pipework, central spout and on
the rinse valve makes it easier to assemble.
Check whether the milk pipework is correctly
connected to the central spout.
The milk pipework is blocked.
Clean the central spout and milk pipework carefully
with the brush.
This is not a fault. The drip tray was not properly
removed and/or replaced too quickly.
The drip tray is not in the correct position and is
therefore not detected.
Empty the drip tray and the waste container.
Reassemble all parts and push the drip tray back as
far as it will go in the coffee machine.
Advertisement
