Advertisement
Installation
Disconnecting from the power supply
Risk of electric shock from volt-
age.
There is a risk of electric shock if the
appliance is reconnected to the volt-
age during repair or service work.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
power supply, do one of the following
depending on installation:
Safety fuses
Completely remove the fuse links
from the screw caps.
Automatic circuit breakers
Press the test button (red) until the
middle button (black) springs out.
Built-in circuit breakers
For circuit breakers of at least type B
or C, switch the lever from 1 (on) to
0 (off).
Ground fault circuit interrupters
Ground fault circuit interrupters:
switch the main switch from 1 (on) to
0 (off) or press the test button.
50
Advertisement
