hit counter code
Download Print this page

Miele KM 7020 Operating And Installation Instructions page 35

Advertisement

Problem
After switching on a
cooking zone,  ap-
pears in the front left
cooking zone display
and  appears in the
front right cooking zone
display for a few sec-
onds.
The cooking zones do
not heat up.
 flashes in a
cooking zone
display.
A message not listed in
this table is appearing
in the cooking zone dis-
plays.
Frequently asked questions
Possible cause and solution
Demo mode has been activated.
 Turn the knob for the front left cooking zone coun-
terclockwise and hold.
 Turn the knob for the front right cooking zone
twice briefly counterclockwise and then turn coun-
terclockwise and hold until  appears in the
cooking zone display.
The cooking zone knob has been turned clockwise or
counterclockwise for longer than 30 seconds.
 Turn the knob to 0. If the fault message does not
go out, there is a technical fault. Contact Miele
Customer Service.
There is an electronic fault.
 Disconnect the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after the power supply has
been restored, please contact Miele Customer
Service.
35

Advertisement

loading