Table of Contents
Advertisement
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Switching the appliance on
The refrigeration and freezer sections
can be switched on together with the
two On/Off sensors.
To enable the temperature to get
sufficiently cold inside the refrigerator,
allow it to run for approx. 3–5 hours
(depending on the ambient
temperature) before placing food in it.
Do not place food in the freezer
section until the temperature is at least
-18 °C.
Touch one of the two On/Off
sensors until the temperature display
lights up.
The appliance is switched on and the
interior lighting will come on when the
fridge door is opened.
Switching on and off
The temperature display for the
refrigerator section shows the current
temperature in the refrigerator section.
– If the temperature in the freezer
section is above 0 °C, bars will flash
in the temperature display for the
freezer section.
– As soon as the temperature drops
below 0 °C, the current temperature
in the freezer section will flash in the
display.
– The display LEDs will flash until
the set temperature has been
reached in the freezer section.
The appliance will gradually reach the
pre-set temperatures:
– Temperature in the refrigerator
section = 3 °C
– Temperature in the freezer section =
-18 °C
23
Advertisement
Table of Contents
