Table of Contents
Advertisement
Setting the display brightness
You can adjust the brightness of the
display to suit the light conditions in the
room.
The display brightness can be adjusted
in steps from (lighting off) to
(maximum brightness). The factory
default setting is .
Touch the SuperFreeze sensor to
the right-hand side of the display for
approx. 5 seconds.
MENU lights up in the display and
flashes.
Settings mode is now activated.
Touch one of the sensors for setting
the temperature ( or ) repeatedly
until appears in the display.
Touch the SuperFreeze sensor to
confirm your selection.
The last selected setting will appear in
the display.
By touching one of the sensors for
setting the temperature ( or ), you
can select the desired level of
brightness for the display. The display
will light up at the level of brightness
that you just selected.
Touch the SuperFreeze sensor to
confirm your selection.
MENU lights up in the display and
flashes.
Touch the right On/Off sensor to
exit Settings mode.
The brightness is now set to this new
value.
Further settings
Changing the temperature unit
(°C/°F)
The temperature can be displayed in
either Fahrenheit (°F) or Celsius (°C).
Touch the SuperFreeze sensor to
the right-hand side of the display for
approx. 5 seconds.
MENU lights up in the display and
flashes.
Settings mode is now activated.
Touch one of the sensors for setting
the temperature ( or ) repeatedly
until
appears in the display.
Touch the SuperFreeze sensor to
confirm your selection.
Possible settings
: degrees Celsius
–
: degrees Fahrenheit
–
was previously set,
If
selected.
was previously set,
If
selected.
Touch the SuperFreeze sensor to
confirm your selection.
MENU lights up in the display and
flashes.
Touch the right On/Off sensor to
exit Settings mode.
The desired temperature unit is now set.
can now be
can now be
33
Advertisement
Table of Contents
