Table of Contents
Advertisement
Changing the door hinging
Refitting the lower door
Pull hinge pin complete with
washer and adjusting foot
upwards to remove.
Remove the stopper .
Undo the screws and remove the
hinge plate .
Unscrew the hinge part from the
hinge plate , turn it 180°, and screw
it into the opposite hole in the hinge
plate.
Insert the stopper into the other
hole.
Remove the cover .
Remove the screw and screw it
into the outermost hole on the
opposite side.
Turn the cover by 180° and refit it
in the holes on the opposite side.
Screw the hinge plate onto the
opposite side, using only the outer
two slots. Do not use the middle hole
because you will not be able to align
the door later on.
Important: Screw the adjustable
foot into the hinge pin as far as
it will go.
78
Reinsert the hinge pin complete
with washer and adjustable
foot .
Important: The lug on the hinge pin
must point to the back again.
Place the lower door on the hinge
pin from above.
Close the lower door.
Insert the hinge pin in the middle
of the appliance through the hinge
plate and into the lower door.
Advertisement
Table of Contents
