Table of Contents
Advertisement
Problem solving guide
Message
The display LED is lit
up and an alarm is
sounding. The
temperature display for
the freezer section is
flashing.
F0 to F9 appears in the
display.
58
Possible cause and remedy
There is a power cut: The temperature in the
appliance over the last few days or hours has risen
too high because of a power cut or an interruption to
the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
Touch the sensor.
The warmest temperature recorded in the freezer
section will flash for about 1 minute in the
temperature display for the freezer section.
Touch the sensor.
The warmest temperature display will disappear. The
display will revert to showing the current temperature
in the freezer section.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be re-frozen after it has been cooked.
There is a fault.
Call Miele.
There is an appliance fault: This display will override
any settings which have just been selected.
An appliance fault has priority over any current door
and/or temperature alarms in the display.
Advertisement
Table of Contents
