Table of Contents
Advertisement
Changing the door hinging
Removing the upper door
Loosen the cover by carefully
inserting a flat-headed screwdriver
into the gap from below, and then
remove it.
Unscrew the hinge part , turn it
180° and fit it on the opposite side. If
necessary, drill pilot holes for the
screws.
Remove the upper cover by sliding
it forward from the back and then
lifting it up and off.
Remove the cover by pulling it
upwards.
Close the upper door.
Danger of injury when removing
the appliance door!
The appliance door is no longer
secure once the hinge plate has
been removed.
The door must be held by a second
person.
Loosen the screws in the upper
hinge plate and pull it upwards and
off.
74
Danger of injury when removing
the upper door!
As soon as the hinge pin is located in
the upper door rather than in the
middle hinge plate, the lower door is
not secured and could fall off.
Ensure that the hinge pin remains
located in the middle hinge plate and
in the lower door.
Carefully lift the upper door up and
off and set it aside.
Fit the cover on the opposite side
so that it engages.
Attach the cover on the opposite
side.
Advertisement
Table of Contents
