Table of Contents
Advertisement
The appliance doors can be aligned
with the appliance housing after they
have been fitted.
In the following illustration the door is
not shown in the closed position to
make it easier to see what you have to
do.
To align the lower door use the long
outer slots in the lower hinge plate:
Remove the centre screw from the
hinge plate.
Slightly loosen both outer screws .
Align the door by sliding the hinge
plate to the left or right.
Then tighten the screws . The
screw does not need to be refitted.
Aligning the appliance doors
To align the upper door, use the outer
slots in the middle hinge plate:
Slightly loosen both screws .
Align the door by sliding the hinge
plate to the left or right.
Then tighten the screws .
83
Advertisement
Table of Contents
