Table of Contents
Advertisement
The correct temperature
Temperature display
In normal operation the upper
temperature display shows the
average, current temperature in the
refrigerator section and the lower
temperature display shows the
temperature in the warmest part of
the freezer section.
Depending on the ambient temperature
and the temperature setting, it can take
the machine a few hours to reach the
temperature required and for this
temperature to then be shown as a
constant temperature on the display.
If the temperature in the freezer
remains above -18 °C for a long
time, check that the frozen food has
not started to defrost.
If it has, check that the food is safe
to use and if it is, use it as soon as
possible or cook it before freezing it
again.
26
Setting the temperature
Use the two and sensors of the
relevant section to set the
temperature higher or lower.
The following information appears in the
display when the sensors are touched:
– When first tapped: The last preset
temperature flashes.
– Each subsequent touch of the
sensor: The temperature is adjusted
in 1 °C steps.
– Leaving the finger on the sensor
changes the temperature
continuously.
Approximately 5 seconds after the last
time a sensor has been touched, the
display automatically reverts to showing
the current temperature inside the
refrigerator.
Advertisement
Table of Contents
