Advertisement
Washing machine
accessories
Connector Box
Peak load/energy
management
Liquid dispensing
connection
WiFi/LAN interface The washing machine is equipped with a WiFi/LAN interface for ex-
Reference to external machines
A reference to external hardware appears.
Confirm with the OK symbol.
If using a Connector Box, connect it before initial commissioning. The
washing machine must be disconnected from the power supply.
Then start the commissioning process.
Optional accessories
Only use genuine Miele spare parts and accessories with this ma-
chine.
Using parts or accessories from other manufacturers may void the
warranty, and Miele cannot accept liability.
The Connector Box allows external hardware from Miele and other
suppliers to be connected to the Miele Professional washing machine.
The Connector Box is supplied with voltage by the Miele Professional
washing machine.
The separately available set consists of the Connector Box and fasten-
ers for installation on the machine or on the wall.
A peak-load or energy management system can be connected via the
Connector Box.
The energy management system monitors the energy consumption
of a system and deactivates individual pieces of equipment tempo-
rarily by means of the peak-load negotiation in order to ensure that
certain total load limits are not exceeded.
When the peak-load function is activated, the heating is deactivated
and the program stopped. A message appears in the display to inform
you of this.
The program is resumed automatically when the peak-load function
finishes.
External liquid dispenser pumps with a "container empty" indicator
and/or flowmeters can be used via the Connector Box to dispense liq-
uid detergents.
It is particularly important to observe the manufacturer's instructions
when using a combination of cleaning agents and special application
products.
changing data.
The data interface provided on the LAN connection complies with
SELV (Safety Extra Low Voltage) in accordance with EN 60950. The
LAN connection uses a RJ45 connector in accordance with EIA/
TIA 568-B.
Connected machines must also comply with SELV.
Installation
101
Advertisement
