Advertisement
Changing the program sequence
Changing a pro-
gram
Altering the wash
program
Canceling a pro-
gram
Switching on the
washing machine
after a power fail-
ure
50
Washing machine
You will need to cancel the current program before you can select a
new one.
You can cancel a wash program at any time after it has started.
Touch the Start/Stop sensor control.
The following will appear in the display:
Program stopped. Continue with "Start/Stop"
The following will appear in the display:
Program stopped.
Continue with "Start/Stop"
program info
Select
.
Finish
The suds are not drained so they can be used again in a subsequent
program. Once the program has ended, the program end screen is
displayed. It is possible to switch to the main menu while the suds
are in the drum or to drain the suds by pressing the
trol.
The drum door remains locked while there is water in the machine.
The door can be opened under the condition
Wait until the door unlocks.
Pull open the door.
Remove the laundry.
If the washing machine is switched off with the button during a
wash program, the program will be interrupted.
Switch the washing machine back on with the button.
Note the message in the display.
Touch the Start/Stop sensor control.
The program continues.
11:02
2:27
Finish
Start draining
Program end without water
con-
.
Advertisement
