Advertisement
Technical data
PDW 909 machine data
Electrical connection
Connection voltage
Frequency
Power rating
Current
Fuse rating
Heater rating
Installation dimensions
Casing width (without add-on components)
Casing height (without add-on components)
Casing depth (without add-on components)
Overall machine width
Overall machine height
Overall machine depth
Minimum width of transport opening
Minimum safety distance between wall and rear of machine
Door opening diameter
Door opening angle
Weight and floor load
Net weight
Maximum floor load during operation
Water connection
Cold water connection
Required flow pressure
Maximum flow rate
Threaded union required (male thread, to be provided by customer on site in accordance with
DIN 44991, flat sealing)
Length of water inlet hose supplied
Warm water connection
Maximum permissible hot water temperature
Required flow pressure
Maximum flow rate
Threaded union required (male thread, in accordance with DIN 44991, flat sealing)
Length of water inlet hose supplied
Drainage (DP)
Maximum waste water temperature
Waste water connection (on machine)
Maximum drainage rate
Supply air
Recommended free air intake cross-section into the room:
(equivalent to 3 times the exhaust air cross-section of a machine).
There must be sufficient air intake to the installation site to match the air outlet volume.
126
27 1/4" (692 mm)
76 3/8" (1940 mm)
29 15/16" (761 mm)
27 1/4" (692 mm)
76 7/16" (1942 mm)
76 7/16" (851 mm)
50 7/8" (1292 mm)
15 3/4" (400 mm)
14 9/16" (370 mm)
see installation plan
see installation plan
14.5-145 psi (100-1000 kPa/1-10 bar)
14.5-145 psi (100-1000 kPa/1-10 bar)
External diameter 22 (DN 22 / 22 mm / 7/8")
See data plate
See data plate
See data plate
See data plate
See data plate
See data plate
180°
10 l/min
3/4"
61" (1.55 m)
158 °F (70 °C)
10 l/min
3/4"
61" (1.55 m)
203 °F (95 °C)
26 l/min
339 cm²
Advertisement
