Advertisement
Installation
Use of non-return
valves
90
Water connection
The flow pressure must amount to a minimum of 100 kPa (14.5 psi)
and must not exceed an overpressure of 1,000 kPa (145 psi). If the
flow pressure is higher than 1,000 kPa (145 psi), a pressure reducing
valve must be used.
The machine must be connected to the water connection using the
water inlet hoses provided.
The connection points are subject to water connection pressure.
Turn on the faucets slowly and check for leaks. Correct the position
of the seal and screw thread if appropriate.
Attach the non-return valve to the faucet.
Attach the water inlet hose to the thread of the non-return valve.
Risk to health and risk of damage due to contaminated incoming
water.
The quality of the incoming water must comply with the drinking
water regulations in the country in which the washing machine is
being operated.
Always connect the washing machine to the drinking water supply.
Advertisement
