Advertisement
End of the pro-
gram
Removing the
laundry
Care notes
Prerequisite for
setting the timer
Setting the timer
The laundry will be cooled down after the end of the program. The
message
Finish/Cooling down
ing phase. The laundry can now be unloaded.
After the cooling phase and the drying program is completed, the
message
is displayed.
Finish
The tumble dryer will switch off automatically after the set time after
the end of a program.
If the
Anti-crease
to rotate in intervals after the end of the program. This reduces creas-
ing if the laundry cannot be unloaded straight away.
* The Anti-crease function is switched off as the factory default set-
ting and can be activated in the supervisor level.
Open the door.
Remove everything from the drum.
Items left in the dryer could be damaged by over-drying when the
dryer is used the next time.
Always remove all items from the drum.
Switch the tumble dryer off by pressing the button.
This tumble dryer requires regular maintenance, particularly if it is
used on a continuous basis. Please see "Cleaning and care" for de-
tails.
Timer
The Delay start must be activated in the Supervisor level in the Con-
trols / Display menu so that the Timer can be selected. Before the pro-
gram starts, the Timer can be used to select a program start time or
program end time.
Touch the
sensor button.
Timer
Select the
Finish at
Set the hours and the minutes and confirm your entry with the
sensor button.
OK
will appear on the display during the cool-
* option has been selected, the drum continues
,
, or
option.
Start in
Start at
Drying
49
Advertisement
