Advertisement
Tumble dryer supervisor level
Set languages
Display brightness
Clock display
Date
Volume
112
Language setting
The sensor button can be used to select a language. All lan-
guages are available (factory default).
You can change the order of the first 4 languages. These slots are allo-
cated to the most commonly used languages.
Standard language
The user language cannot be changed. The user language is the same
as the supervisor language. The sensor button is not active.
The languages for the
6 languages can be selected. All languages are available.
If you wish to add a new language to the language menu:
First select the language you want to replace.
All available languages are displayed.
Select and confirm the language to replace the previous language.
The new language appears instead of the old one.
The brightness of the display can be altered. The setting depends on
the various lighting conditions in the place of installation.
- It can be set to one of 10 different levels.
After selecting the clock format, you can set the time of day.
Clock format
- Factory default: 24-hour display
- 12-hour display
-
No clock
Set
- The time can be set.
The date can be set after selecting the date format.
-
Date format
The date can be shown starting with the day, month, or year.
-
Date
The date is set.
The volume for various sounds can be changed.
The volume can be changed for the following tones:
-
Finish tone
The finish tone signals the end of the drying program.
-
Keypad tone
-
Welcome tone
-
Fault alarm
The fault tone signals a fault and can be switched off. The volume of
the fault tone cannot be adjusted.
International lang. entry
setting can be changed.
Advertisement
