Advertisement
Time
Date
Volume
Visibility parame-
ters
Machine off status In order to save energy, the washing machine can be set to switch to
Delay start
Memory
After selecting the clock format, you can set the time of day.
Clock format
- 24 h clock
- 12 h clock
- No clock
Set
- The time can be set.
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault tone
The fault tone can be activated or deactivated.
Various parameters, such as the temperature, spin speed, Extras,
etc., are displayed when a program is selected. You can decide which
parameters should not be displayed. The parameters cannot be
changed/are no longer displayed.
Factory default: all parameters are visible (marked in orange)
standby mode automatically after the end of the program or if no fur-
ther selection is made. In the default setting, the machine will not
switch to standby mode automatically.
Changing this setting leads to increased energy consumption.
- No switch-off (factory default)
- Switch-off after 15 minutes
- Switch-off after 20 minutes
- Switch-off after 30 minutes
The delay start (timer) display can be switched on or off.
Factory default: on
The washing machine will save the settings (temperature, spin
speed, and some of the options) which have been selected for a
wash program after the program has started.
Washing machine supervisor level
105
Advertisement
