Advertisement
Washing machine supervisor level
Manual control
Change order
Temperature unit
Weight unit
Supervisor code
WiFi
106
When the wash program is chosen again, the saved settings will ap-
pear in the display.
Factory default: off
The manual control function can be switched on or off. Switch-on can
be carried out with or without identification.
The skip function can be switched on or off.
You can select the unit for the temperature display (°C/°F).
You can decide whether load sizes are displayed in "kg" or "lbs". You
can also switch this information off altogether.
You can alter the access code to the supervisor level.
Enter the current code.
Enter a new code.
For the use of WiFi / LAN additional Miele digital products are nec-
essary. The ability of Miele digital products depends on the availabil-
ity of the services in your country.
The different services are not available in all countries.
For information about availability, please visit www.miele.com.
Control the networking of your washing machine.
- Setup
This message only appears if the washing machine has not yet been
connected to a WiFi network.
- Deactivate (visible when the network is activated)
The network remains set up; the WiFi function is switched off.
- Activate (visible if the network is deactivated)
The WiFi function is reactivated.
- Connection status (visible when the network is activated)
– The quality of WiFi reception
– The network name
– The IP address
- Set up again (visible if already set up)
Resets the WiFi login (network) to immediately re-establish a new
connection.
- Reset (visible if already set up)
The network is no longer set up. A new connection has to be estab-
lished in order to use the network again.
– The WiFi is switched off
– The WiFi connection will be reset to the factory default
Advertisement
