Advertisement
Description of the functions
Cooking duration
Depending on the function, you can set
a cooking duration of between 1 minute
and 10 or 12 hours.
The cooking durations of the Automatic
and Maintenance programmes are set
at the factory and cannot be altered.
When cooking with steam, as well as for
programmes and applications with pure
steam operation, the cooking duration
does not begin until the set temperature
is reached. It starts immediately for all
other functions, programmes and
applications.
Noises
A humming sound can be heard during
operation and after switching off the
steam combination oven. This noise
does not indicate incorrect operation or
an appliance fault. The noise is made by
water being pumped through the
system.
When the steam combination oven is in
use, you will hear a fan noise.
Heating-up phase
The display shows the temperature in
the oven compartment as it rises during
the heating-up phase in all functions
(exceptions:
Full Grill
The duration of the heating-up phase
with steam cooking will depend on the
quantity and temperature of the food. In
general, the heating-up phase will take
approx. 7 minutes. It will be longer if you
are cooking refrigerated or frozen food.
The heating-up phase may also take
longer when cooking at lower
temperatures and when cooking with
the
function.
Sous-vide
26
,
).
Economy Grill
Cooking phase
The elapsing remaining time is shown in
the display during the cooking phase.
When cooking with steam, the cooking
phase begins once the set temperature
is reached. It starts immediately for all
other functions, programmes and
applications.
Steam reduction
With steam cooking and Combi mode,
the steam reduction function will switch
on automatically at the end of a cooking
programme which uses a temperature
within a certain temperature range. This
is to prevent a large amount of steam
escaping when the door is opened.
appears in the display.
Steam reduction
Steam reduction can be switched off
(see "Settings - Steam reduction").
When steam reduction is switched off, a
large amount of steam will escape when
the door is opened.
Oven interior lighting
For energy saving reasons, the oven
interior lighting has been set at the
factory to go out after the programme
has begun.
If you want the lighting to remain on
during cooking, the relevant factory
default setting needs to be changed
(see "Settings – Lighting").
If the door is left open at the end of a
cooking programme, the oven lighting
will switch off automatically after
5 minutes.
The lighting can be switched on for
15 seconds by touching the sensor
on the control panel.
Advertisement
